SismoLink for FS2020 & PMDG

person Posted By: Sismo list In: SismoLink On: comment Comment: 19 favorite Hit: 6195

SismoLink is the connector under development to connect Sismo's modules with PMDG 737 within FS2020

sismolink

Following the same approach used in OrbitXP, Sismo is developing a new connector to be the interface between the Sismo's modules and PMDG with FS2020. 

The connector does not require much input data from the customer, therefore it is be easy to use.

This connector is not needed with Prosim:737, due to the interface between Sismo's hardware and this add-on is inside of Prosim:737, being not necesary any connector.

The 1st release has been launched on Septemeber 2023 and currently controls MCP, Captain EFIS, F/O EFIS, MIP,  FWD Overhead and AFT Overhead. 

 

For further info, please read the last User Manual V1.4

Download the last Release V1.7.3

 

Download SismoLink

User Interface (Windows 10/11 Application)

sismolink

Roadmap

sismolink

Tags: sismolink 737ng 737max sismo

Comments

Created On Friday, November 17, 2023 Posted By Sismo Customer Service Comment Link
Hi Mr. Glassman,

Thanks for your message, we have not abandont P3D, most f ur customers are using Prosim with this platform. In the case of PMDG we have selected FS2020, because PMDG has moved the development to this platform. Please let us know the results of your test and if Sismolink does not work properly, we can check a plan to update this software with P3D. thanks
Created On Friday, November 3, 2023 Posted By Mark Glassman Comment Link
HI. I gave up on this ever being released, but am happy to see that you've done it. I am very disappointed, though, to see that the P3D support seemingly has been dropped. I will attempt to install this on P3D 5.4 but doubt it will work, unfortunately.

Unless things have changed, it seems that P3D is still the more legitimate sim for a home cockpit whereas MSFS 2020 is for the gamer PC crowd. Perhaps I'm wrong.

At any rate, kudos for developing this. I know it has been in the making for a long time.
Created On Friday, October 27, 2023 Posted By Sismo Customer Service Comment Link
Hi,

OrbitXP is only for XPlane 11 and 12 with Zibo 738 and SismoLink is for FS2020 with PMDG, therefore it has not sense to run at the same time both applications, due to it is not usual to have launched XPlane and FS2020
Created On Friday, September 22, 2023 Posted By Barry Simmons Comment Link
Is it possible to run the new Sismo Link and Orbit X at the same time ?
Orbit X automatically starts up and is running all the time, Do I need to turn it off and how is this done ?
Thanks and keep up the good work.
Created On Friday, May 5, 2023 Posted By Didier Pilois Comment Link
Hello,

Are there any good (or bad!) news about "SismoLink for P3D and FS2020"???

Best regards,

Didier
Created On Saturday, March 25, 2023 Posted By Chris Tian Comment Link
When is this finally going to be available? I cant seem to be hooking up the MCP-EFIS to FS2020 running PMDG 737... thanks for an update!
Created On Tuesday, March 14, 2023 Posted By uli kelch Comment Link
Is sismolink immediately available?
Thanks
Created On Thursday, March 2, 2023 Posted By Matthias Roschk Comment Link
Hello,
one Question, can i use my MCP and AFT OVHD with PMDG in FS2020?
I read about the SismoLink, but i can not find a Download Link ?

Thanks
Matthias
Created On Sunday, February 19, 2023 Posted By antonio muñoz lopez Comment Link
Buenas.Soy cliente vuestro.tengo cockpit completo b737. Queria saber cuando estará listo Sismolink para utilizarlo con FS2020 y todos mis instrumentos de sismo.Gracias.
Created On Saturday, November 19, 2022 Posted By Stijn Jacobs Comment Link
Hi,

Im considering getting sismo panels in the future and was wondering what the status of sismo link is currently

Leave your comment

Sunday Monday Tuesday Wednesday Thursday Friday Saturday January February March April May June July August September October November December

New Account Register

Already have an account?
Log in instead Or Reset password